Name: Access Reader Lite
Brand: Ubiquiti
SKU: UA-Reader-Lite

Access Reader Lite

Highly secure NFC smart fob that uses multi-layer encryption, including proprietary UniFi Access security protocols.

UA-Pocket

Highly secure NFC smart fob that uses multi-layer encryption, including proprietary UniFi Access security protocols.

Access Pocket Keyfob

Pocket Keyfob

Default

The card data is encrypted with both AES-128 and with UniFi Access proprietary security mechanism. These additional security measures protect the card number from leaks and duplication.

UA-Card

A pack of (20) highly secure NFC cards used with our Access Readers to unlock doors.

Access Card

This device can be installed indoors or under a roof overhang outside.

UA-Reader-Lite

A convenient door access scanner supporting NFC reader and handwave door unlocking.

Reader Lite

Features:<ul><li>(3) PoE ports to connect Access Readers or Protect cameras</li><li>(2) Lock relays to support 12V-powered and dry options</li><li>(2) AUX relays to connect an external siren and automatic door opener</li><li>(4) Inputs for motion sensors, push buttons, emergency alarms, and a door position sensor</li><li>Powered with PoE++</li></ul>

UA-Hub

A single-door mechanism that provides complete entry control via connected Access Readers.

Access Hub

A single-door mechanism that provides complete entry and exit control via connected Access Readers.

Mechanical
Dimensions	94.9 x 40 x 31.1 mm (3.7 x 1.6 x 1.2")
Weight	67 g (2.4 oz)
Enclosure material	Polycarbonate
Mounting options	Wall-mount, gang box mount* *The UA-Reader Lite must be installed either indoors or under a roof eave outdoors.
Weatherproofing	IP54
Hardware
Networking interface	10/100 MbE
Max. power consumption	6W
Power method	PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range	44–57V DC
Button	(1) Factory reset
LEDs	White/Blue
Connectivity	Ethernet, BLE 4.1
NFC frequency	13.56 MHz
NFC reading range	<30 mm
NFC standards	ISO 14443A, 14443B, 15693
NFC technology	NFC Tag 1, 2, 3, 4, 5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire
Operating environment	Outdoor use
Ambient operating temperature	-20 to 40° C (-4 to 104° F)
Ambient operating humidity	5 to 90% noncondensing
Software information	The software version of a product can be checked at https://unifi.ui.com
UL 294 level	Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
UL 294 statement	Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements	Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ² ) for patch cords; 24 AWG (0.21 mm ² ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade	Grade assignment: I
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level	UA-Reader Lite, V02
LED
System	Steady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmware
Software
Management application	UniFi Access: Version 1.5.9 and later